IVF On Demand OnLine Filter
The IVF On Demand OnLine Filter Provides protection for 6 months.
Filter Specifications and Certifications
- Purifies CO2 and N2 gasses
- VOC Capacity: 1400 (mg) tested with Isopropyl Alcohol, ethanol, methanol, acetone, Toluene, Xylenes, 2-butanone, styrene acrolein, benzene, ethyl acetate, 111-trichloroethane, n-Hexane, Methylene chloride, propionaldehyde, butyraldehyde, hexanaldehyde
- 2 filters: Activated carbon and HEPA (1 Micron)
- Fitting connections: Male/Female :1/4” Flow cut-off valve quick coupling with metal latch (2QV/2QV)
- Sterilized
- Regulatory: Certified by CE class 1, meets 93/42/EEC Medical Device Standards
- Constructed with polypropylene resins and filtration media with 21 CFR Part 177 and USP Class VI biological test for plastic.
- Maximum operating conditions: 60 o C (140oF), 5.5 bar (80 psi)
Main application and target market
- Purifies CO2 and N2 gasses
- Market: Medical
| Materials of Construction: (Standard Construction) |
Media: Fibrous Activated Carbon and HEPA media Media Supports: Polypropylene Cage, Core, End Caps: Polypropylene, Silicone, Thermal End Cap |
| Fitting Connections: | Male/Female : 1/4” Flow cut-off valve quick coupling with metal latch (2QV/2QV) |
| Nominal Dimension: | Length: 1.5” (38 mm), 2.5” (63 mm), 5” (127 mm), 7.5” (190 mm), and 10” (254 mm) Diameter: 2.8” (73 mm) |
| Effective Purification Volume: (Single Layer/PP Construction) |
1.5”: 0.65 grams |
| Operating Conditions: |
Maximum Operating Pressure: Liquid: 5.5 bar (80 psi) at 72 °F/22 °C Maximum Forward Differential Pressure: 4.1 bar (60 psi) at 72 °F/22 °C Maximum Reverse Differential Pressure: 2.1 bar (30 psi) at 72 °F/22 °C Minimum Burst Pressure: 8.3 bar (120 psi) at 72 °F/22 °C Maximum Operating Temperature: 140°F/60°C |
Product use and responsibility. IVF Store distributes products for the intended use stated by each manufacturer on its labeling and Instructions for Use (IFU). Product descriptions on this site are for general information and do not change or expand the manufacturer’s intended use. The purchasing laboratory is responsible for confirming that a product is suitable for its application, following the manufacturer’s IFU, and validating products under its own quality system before clinical use. IFUs are available from the manufacturer or on request from Customer Service.