Skip to content
Close (esc)

Email List

Be the first to hear about the latest product releases, collaborations and online exclusives.

ICSI/Biopsy Low Wall in vitro Fertilization (IVF) Dish (353655) - DISCONTINUED

Regular price $156.40 Sale price $219.00
Special Price

$156.40 USD / 100.0 Unit
SKU: 353655
Packaging
Dish

Falcon® 50 mmx9 mm Not TC-treated in vitro Fertilization (IVF) ICSI/Biopsy Low Wall Dish (353655)

Non-Tissue Culture-treated Falcon Low Wall Dish can be utilized in the ICSI (IntraCytoplasmic Sperm Injection) procedure. This 50mm dish has many of the same features as the other IVF products except the dish is non-Tissue Culture-treated (nonwettable) for optimal media droplet consistency.


Features:

  • Well area: 18.3 cm², Height: 8.6mm
  • Pre-tested plasticware for in vitro fertilization (IVF)
  • CE marked to the Medical Device Directive 93/42/EEC
  • Manufactured in accordance with FDA Quality System Regulation
  • Nonembryotoxic, nonpyrogenic, noncytotoxic
  • Facilitated media droplet creation (Non TC-treated, cat. no. 353655 only)
  • Sterilized by gamma irradiation (10⁻⁶ SAL)
  • Flat-bottom for distortion-free optics
  • Packaged in peel-open, medical-style packaging
  •  

    More on Falcon IVF Dishes


    The Falcon low-wall dish has many of the same features as the other IVF products, except the dish is non-tissue culture (TC)-treated (non-wettable), for optimal media droplet consistency. The Falcon low-wall dish is ideal for ICSI and embryo biopsy, and makes the micromanipulation procedure easier to perform. This product is packaged in individually sealed blister compartments so one dish can be accessed at a time, and the remaining dishes are kept protected. Procedures requiring long term incubation are not recommended in the Falcon low-wall dish due to the tight lid fit, which results in low gas exchange rates.

    Certified and Tested

    Pre-tested Falcon® IVF products were the first plasticware available certified sterile, nonpyrogenic, noncytotoxic, and nonembryotoxic. These pre-tested products save you time and expense in complying with the College of American Pathologists and the American Society for Reproductive Medicine recommended standards for IVF labs.

    Performance Tested

    Each lot of Falcon IVF product is subjected to a performance test for growth with a mammalian cell line. A minimum of 90% confluency within 72 hours is required for lot acceptance.

    Quality Management and Control

    Falcon IVF products are manufactured in compliance with the current version of the EN ISO 9001 Standard, the EN ISO 13485 Standard, the Medical Device Directive (MDD) 93/42/EEC as amended with 2007/47/EEC, and the FDA CFR 21 Part 820 and current Good Manufacturing Practices (cGMP).

    Medical Device Classification

    US FDA 510(k) cleared Class II medical device
    CE marked in compliance with the European Medical Devices Directive 93/42/EEC as Class IIa medical device

    Embryotoxicity

    Each lot of Falcon IVF product is tested for embryotoxicity using the one-cell mouse embryo assay. A minimum of 75%, of both test and control embryos, must reach the hatched and/ or expanded blastocyst stage in order for our products to be deemed nonembryotoxic and acceptable for product release.

    Additional MEA Testing option available via Embryotech Laboratories - See 353655-MEA

    Sterility

    Falcon IVF products are irradiated and dosimetrically released per the requirements of ANSI/ AAMI/ISO 11137 and meet a minimum Sterility Assurance Level (SAL) of 10-6.

    Nonpyrogenic

    Each lot of Falcon IVF product is tested and meets the criteria established in the United States Pharmacopeia (USP) Chapter <85>, “Bacterial Endotoxins Test.” The acceptance level for a product is less than 0.1 EU/mL or 5 EU/device.

    Cytotoxicity

    Thorough testing is conducted to qualify material resins to USP Class VI. Products are also tested and qualify as noncytotoxic per the requirements of ISO 10993-5, Biological evaluation of medical devices – Tests for in vitro cytotoxicity.

    Genotoxicity, Carcinogenicity, and Reproductive Toxicity

    Products have been tested and demonstrated to be non-mutagenic and non-genotoxic per the requirements of ISO 10993-3, Biological evaluation of medical devices: Tests for genotoxicity, carcinogenicity, and reproductive toxicity.

    Individual certificates, containing actual test results, are available for each lot by contacting your local Corning Life Sciences office after you receive your order.

    Quality Certificate

    Brochure

    Product Number   353655
    Qty./Pk   4 / Pk  
    Qty./CS   100 / Cs  
    Brand

      Falcon®  

     

    Lot Number Lookup 

    To look up a lot number for a Falcon item, click the above link and enter your Product Number and Lot number under the Quality Certificate Lookup. 

    Specifications:

    Mfr. No. 353655 50mm x 9mm Not TC-Treated In Vitro Fertilization (IVF)/Low Wall Dish, 4Pack, Sterile, 100/Case
    Mfr. No 353655-MEA
    Additional MEA TESTED - 50mm x 9mm Not TC-Treated In Vitro Fertilization (IVF)/Low Wall Dish, 4Pack, Sterile, 100/Case

    Added to cart